Integer Status (Ins); Single Point Status (Sps) - ABB COM600 series User Manual

1MRS757274
3.5.7.2.
3.5.7.3.
COM600 series, Version 4.1
External OPC Server User's Manual

Integer status (INS)

Table 3.5.7.2-1
Property/Para- Value or Value range/ Default
meter
Basic
Common Data INS
Class
Addresses
Item Tag Path Default: None

Single point status (SPS)

Table 3.5.7.3-1 Configurable SPS (for OPC internal data) properties for OPC servers
Property/Para- Value or Value range/ Default
meter
Basic
Common Data SPS
Class
Addresses
Description
Common data class according to IEC
61850
Item tag path for the internal status
information. The internal server tags that
can be used are located in the Attributes
nodes that are located under the root, line,
and IED nodes. When an attribute tag is
referred to in the internal item definitions
below, it is possible to use either the whole
tag path or just the path relative to the IED
(the internal tags are configured per IED);
for example, Attributes\Diagnostic coun-
ters\Transmitted data messages. When
the whole path is used, it must be pre-
ceded by a slash (/) character, for
example, /Channel Name\Attributes\Dia-
gnostic counters\Transmitted data mes-
sages.
Description
Common data class according to IEC
61850
27