Configuring Data Objects For External Opc Client; General About Configuring Data Objects For External Opc Device; Directional Protection Activation Information - ABB COM600 series User Manual

1MRS757274
3.5.8.
3.5.8.1.
3.5.8.2.
COM600 series, Version 4.1
External OPC Server User's Manual

Configuring data objects for External OPC Client

General about configuring data objects for External OPC Device

Use the OPC Browser tool to configure the OPC item paths
in the data objects with SAB600. For more information, see
3.4, OPC Browser tool.
The External OPC Server supports the following data object types that provide status
information:
• 3.5.8.2, Directional protection activation information
• 3.5.8.3, Protection activation information (ACT)
• 3.5.8.4, Analogue set point (APC)
• 3.5.8.5, Binary counter reading (BCR)
• 3.5.8.6, Binary controlled step position information (BSC)
•
3.5.8.7, Complex measured value (CMV)
•
3.5.8.8, Delta (DEL)
•
3.5.8.9, Controllable double point (DPC)
• 3.5.8.10, Device name plate (DPL)
• 3.5.8.11, Double point status (DPS)
• 3.5.8.12, Controllable integer status (INC)
• 3.5.8.13, Integer status (INS)
• 3.5.8.14, Integer controlled step position information (ISC)
• 3.5.8.15, Logical node name plate (LPL)
• 3.5.8.16, Measured value (MV)
•
3.5.8.17, Controllable single point (SPC)
•
3.5.8.18, Single point status (SPS)
•
3.5.8.19, WYE
The parameters are stored in Object Properties in SAB600, see the tables for each data
object type. The actual configuration by using SAB600 is performed as described in
3.5.1, General about configuring objects.

Directional protection activation information

Table 3.5.8.2-1 Configurable ACD properties for External OPC Clients, subtype
Basic
Property/Para- Value or Value range/ Default
meter /Example
Basic
61850-Type ACD
Sub Type Basic
Description
61850-Type
Object subtype
29