Configuring Dcom On Opc Server Computer - ABB COM600 series User Manual

1MRS757274
3.6.5.
COM600 series, Version 4.1
External OPC Server User's Manual
Figure 3.6.4-2 Adding permissions for COM600 computer
If you want to run the remote OPC server on a different user
account, you must create the additional user account on the
COM600 computer with same password as on the OPC server
computer including the same remote access rights as the
COM600 user account. Even if you create the additional user
account with the same access rights, the COM600 user account
is still required.

Configuring DCOM on OPC server computer

To configure COM600 permissions on the OPC server computer:
1. Select Component Services > Computers > My Computer.
2. In the My Computer Properties dialog, select the COM Security tab.
3. Click Edit Limits in the Access Permissions section of the dialog, see Figure 3.6.4-
1.
4. In the Access Permission dialog, allow Local Access and Remote Access for
COM600 and click OK (see Figure 3.6.5-1).
COM600_permissions.png
75