Conformity; Trademarks; General - ABB COM600 series User Manual

1.3.
1.4.
1.5.
6
COM600 series, Version 4.1
External OPC Server User's Manual
be responsible or liable for any loss or damage resulting from the use of this manual or
the application of the equipment.

Conformity

This product complies with the directive of the Council of the European Communities
on the approximation of the laws of the Member States relating to electromagnetic
compatibility (EMC Directive 2004/108/EC) and concerning electrical equipment for
use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity
is the result of tests conducted by ABB in accordance with the product standards EN
50263 and EN 60255-26 for the EMC directive, and with the product standards EN
60255-1 and EN 60255-27 for the low voltage directive. The product is designed in
accordance with the international standards of the IEC 60255 series.

Trademarks

ABB is a registered trademark of ABB Group. All other brand or product names men-
tioned in this document may be trademarks or registered trademarks of their respective
holders.

General

This manual provides thorough information on the External OPC Server and the central
concepts related to it. You find instructions on how to configure External OPC Server
related objects. The basic operation procedures are also discussed.
Information in this user's manual is intended for application engineers who configure
the External OPC Server.
This user's manual is divided into following sections:
Introduction
This section gives an overview of the External OPC Server and its features.
Configuration
In this section you will find an overview of configuration. You are given instructions
on how to configure External OPC Server related objects and the model of a substation
or system.
1MRS757274