Ip20 - Siemens G120P Manual

Mounting and installation
2
Line and motor connections
2.6.2
2.6.2.1
2.6.2.2
14
Siemens AG

IP20

FSA...FSC
FSD...FSF
Power Motor
connection connection
Accessing line and motor terminals
1. Loosen the safety catch on the sides of the terminal covers using a suitable
size of flat-head screwdriver.
1
2. Turn the terminal cover up and allow it to engage.
2
Tightening torques:
FSA: 0.4 Nm...0.5 Nm

FSB: 0.55 Nm...0.6 Nm

 FSC: 1.2 Nm...1.5 Nm

The Power Modules are equipped with two-part
connectors. You can remove the detachable part
of the connector from the Power Module by
pressing the unlocking device. The connectors
cannot be mixed up.
Tightening torques:
 FSA: 6 Nm
FSB: 6 Nm

FSC: 13 Nm

CM2G5111en
2014-05-16