Av Input Signal Requirements - Philips BDL4230E/00 Service Manual

68 BDL4230E LCD
85Hz timings can display, but don't guarantee Picture.
1920X1080 should not be scaled. The position must be center. The outside area of display must be
black.
Audio input -
input level reaches 500mVrms, terminated with impedance >10k .
Lineout output -
Speaker output -

2.2.2 AV input signal requirements

CVBS input -
input impedance of 75 .
S-Video input -
Component video input -
HD ready -
FHD
HDMI Input -
General Product Specification
Sensitivity 500mVrms, the amplifier outputs full power when the
Stereo, 2Vrms output.
2 x 10 Wrms back firing speakers, with T.H.D. < 10%.
1000mVpp (including 300 mV sync level), terminated with
Y: 1000mVpp, C: 300mVpp, terminated with input impedance of 75 .
Y: 1000mVpp, PbPr: ±350mVpp, terminated with input impedance
of 75 . 480i/p, 576i/p, 720p, 1080i signal handling capability.
HD ready logo not required, but requirements to be fulfilled as-Display,
display engine:
Video Interfaces:
FHD ready logo not required, but requirements to be fulfilled as:
1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97, 1080p/50, and
1080p/60.
Compliance with HDMI Specification 1.3 or later,
480i/p, 576i/p, 720p, 1080i/p signal handling capability.
TMDS channel:
The minimum native resolution of the display or display
engine is 720 physical lines in wide aspect ratio.
The display device accepts HD input via:
Analog YPbPr. "HD ready" displays support analog
YPbPr as a HD input format to allow full compatibility
with today's HD video sources in the market. Support
of the YPbPr signal should be through common
industry standard connectors directly on the HD ready
display or through an adaptor easily accessible to the
consumer; and:
HDMI HD capable inputs accept the following HD video formats:
1280x720 @ 50 and 60Hz progressive scan ("720p")
1920x1080 @ 50 and 60Hz interlaced ("1080i")
The HDMI input supports copy protection (HDCP).
Carries audio, video and auxiliary data.
Signaling method: According to HDMI Ver. 1.3b specification.
(Type A HDMI).
Video pixel rate: 25 MHz to 165 MHz (Type A)
Pixel encodings: RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4.
Audio sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz,
96kHz, 176.4 kHz, 192 kHz.
Audio channels: up to 8.