Philips BDL4230E/00 Service Manual page 84

84 BDL4230E LCD
ADVANCED OPTION TBC
General Product Specification
INPUT RESOLUTION
Selects to decision of input signal about below timings, 1024x768,
1280x768 and 1360x768.
AUTO: Determines the resolution
automatically.
1024x768: Determines the resolution as 1024x768
1280x768: Determines the resolution as 1280x768
1360x768: Determines the resolution as 1360x768
The setting you select becomes effective when POWER is turned
OFF and ON again.
BLACK LEVEL EXPANSION
MODE-HD), VIDEO<S>, VIDEO only
Selects a level of black expansion from "OFF", "MIDDLE" and
"HIGH."
In case of go under the black cut-off level, please adjust the "Black
level" in moderation on OSD menu.
GAMMA SELECTION
Selects a display gamma, It's refer to the brightness performance
curve of signal input.
2.2
2.4
Native
NOTE: sRGB picture mode is standard and cannot be changed.
SCAN MODE * : INPUT HDMI1,2(HDMI INPUT MODE-HD), CVI,
VIDEO<S>, VIDEO only
Changes the display area of the image.
OVERSCAN: Set to display area about 95%
UNDERSCAN: Set to display area about 100%
SCAN CONVERSION
MODE-HD), CVI, VIDEO<S>, VIDEO only
Selects IP (Interlace to Progressive) converter function.
PROGRESSIVE: Enable the IP function, to convert interlace signal
to progressive. Normally use this setting.
INTERLACE*: Disable the IP function.
*NOTE: This mode is better suited for motion pictures, but it
increases chance of image retention.
* : INPUT PC-A only
* : INPUT HDMI1,2(HDMI INPUT
* : INPUT HDMI1,2(HDMI INPUT