GE MDS ORBIT MCR Technical Manual page 120

pki {
cert-id
key-id
ca-cert-id
}
}
advanced-config {
lna-state
stale-packet-timeout
data-retries
nic-id
gateway-id
arp-cache
adr-mode
adr-threshold
encryption-protocol
}
Other configuration
The advanced configuration on an NX915 module operating as a Remote, shares the same configuration
for LNA stat, stale packets timeout and data retries as an Access Point. The NIC and Gateway Identifier
are for use in manually configuring link paths a station will use in the network. The default value of 0 for
the identifiers configured the module to automatically obtain a path in the network. This is particularly
useful in a network that contains Store-and-Forward devices.
Store-and-Forward Mode
Basic configuration with defaults
The following will configure the NX915 module as a Store-and-Forward (SAF) device with the network
name of "MyNetwork" and default settings.
% set interfaces interface NxRadio nx-config device-mode store-and-forward network-name
MyNetwork
% show interfaces interface NxRadio nx-config | details
modem-mode
device-mode
network-name
data-compression
header-compression
power
security {
security-mode
encryption
}
advanced-config {
lna-state
stale-packet-timeout
propagation-delay
mcast-repeat
data-retries
fragment-threshold
remote-age-time
endpoint-age-time
120
DevicePubCert;
DevicePrivKey;
CACert;
high-sensitivity;
1500;
3;
0;
0;
false;
none;
-70;
2.0;
500kbps;
store-and-forward;
MyNetwork;
none;
false;
30;
none;
none;
high-sensitivity;
1500;
40miles;
3;
3;
0;
600;
300;
MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F