Support Package Monitoring - GE MDS ORBIT MCR Technical Manual

Monitoring
Once the generation of a support package bundle is begun, the process may be cancelled by clicking the
Cancel Generation button. The current status of the generate support package process is displayed on the
web page. Note that the web page does not display the current status if the device has not been instructed
to generate a support package bundle (in other words, if the state is "inactive").
The generation status contains the following items:

Current State – The status of the generate support package bundle task:
- inactive
- preparing
- transfering
- cancelling
- complete
- failure
- cancelled

Detailed Message – The details regarding the operation, such as "Generating support
package"

Size – The total number of bytes in the package (not displayed on the web UI)

Bytes Transferred – The number of bytes already generated or transferred (not displayed on
the web UI)

Percent Complete – The percentage complete for the operation
To view the status of the process in the CLI, ensure the CLI is in operational mode and then follow the
example below:
> show system support-package generate-status
system support-package generate-status state complete
system support-package generate-status detailed-message "Successfully exported support
package"
system support-package generate-status size 2245680
system support-package generate-status bytes-transferred 2245680
MDS 05-6632A01, Rev. F
Figure 3-82. Support Package Monitoring
MDS Orbit MCR/ECR Technical Manual 161