Table of Contents
Advertisement
% show system
name
location "North_Site"
clock {
timezone-location America/New_York;
}
geographical-location {
}
- Normally, only those values explicitly set by the user will be displayed. Users can selectively
view those nodes that assumed a default value by using the "details" modifier on the CLI, like
the example shown on the next page.
- Showing the user's configuration and any nodes that assumed a default value:
> show configuration interfaces interface ETH1 | details
type
enabled true;
ipv4 {
enabled
ip-forwarding false;
address 192.168.1.10 {
prefix-length 24;
}
}
ipv6 {
enabled
ip-forwarding
dup-addr-detect-transmits 1;
autoconf {
create-global-addresses
create-temporary-addressed false;
temporary-valid-lifetime
temporary-preferred-lifetime 86400;
}
}
- Showing the complete data model that the user has access to, while using additional CLI
features:
> show configuration | details | display set | nomore
set logging event-rules console_login description ""
set logging event-rules console_login local true
set logging event-rules console_login priority notice
.....
<Remaining text omitted for brevity>
.....
show [path]
- Display CLI properties..
MDS 05-6632A01, Rev. F
"Device#42";
latitude 43.118376;
longitude -77.61152;
altitude 1.0;
ethernetCsmacd;
true;
true;
false;
MDS Orbit MCR/ECR Technical Manual
true;
604800;
403
Advertisement
Table of Contents
Troubleshooting
