Remote Access Client; Overview; Creation Of A Remote Access Client - ABB 800xA User Manual

Section 3 Configuration

Remote Access Client

Overview

The Remote Access Client service communicates with the Remote Access Server,
but resides on the subscriber system. There is always a one-to-one relation between
one Remote Access Client and one Remote Access Server, i.e. it only communicates
with one Remote Access Server.
The Remote Access Client service is automatically created when the Remote
System object is created.
Remote Access Client requires one license per provider to run without warnings.

Creation of a Remote Access Client

The Remote System object represents the provider system in the subscriber system.
It also holds the information about the upload configuration, and upload history
logs.
The Remote System object can only be created in the Control Structure:
1.
3BSE037076-510 D
To create a Remote System object, select Control Structure and select New
object from the context menu. Select the object type Remote System in the
New Object dialog, see
Figure 15.
Remote Access Client
35