Installation Specifications (Pci_Box); Table 1.11 Installation Specifications (Pci_Box) - Fujitsu PRIMEQUEST 2000 Series Hardware Installation Manual

CHAPTER 1 Installation Data

1.3.10 Installation Specifications (PCI_Box)

Dimensions Width
[mm (in)]
Depth
Length
Mass [kg (lb)] (*2)
Conditions Max. calorific value [kJ/h (BTU/h)]
for air
Displacement [m3/min
conditioner 3
(ft /min)] (*3)
Temperature
and Humidity
condition (*4)
Noise [dB] (*7, *8)
Acoustic power level [B] (*8)
Permissibl
e Vibration
2
[m/s
(gal)]
Permissible dust level [mg/m
Power Input voltage and source resultant pulse number
Supply
conditions
Frequency and fluctuating Range
Max
power
consumpti
on /
apparent
power
Power factor (*10)
Inrush current [A] [Rush hours] (*11)
Leak current [mA] (*12)
*1: Dimensions without protrusions.
*2: Numeric value when each optional device is mounted for maximum number of options.
*3: If the device is overloaded or if abnormality is detected even though the recommended environmental
temperature is used, the FAN rotates at high-speed.
*4: Protect from condensation.
*5: Temperature condition changes according to the installation location above sea level.
For 0 to 1000 m (0 to 3281 ft) above sea level, temperature range at the time of installation: 5 to 35°C
(41 to 95°F)
For 1000 to 1500 m (3281 to 4921 ft) above sea level, temperature range at the time of installation: 5 to
33°C (41 to 91.4°F)
For 1500 to 2000 m (4921 to 6562 ft) above sea level, temperature range at the time of installation: 5 to
31°C (41 to 87.8°F)
For 2000 to 3000 m (6562 to 9843 ft) above sea level, temperature range at the time of installation: 5 to
29°C (41 to 84.2°F)
Error of + 100m in the sea level settings of the location of installation is permissible.
*6: Downtime is the condition in which the device is packed and maintained.
*7: Level of noise which is actually heard varies as per the mounting condition of the position from where the
noise is heard or the position of rack.
*8: Level of noise and level of acoustic power changes according to the environmental temperature

TABLE 1.11 Installation Specifications (PCI_Box)

Item
FAN low speed (Low)
FAN medium speed (Normal)
FAN high speed (High)
At time of Temperature [°C (°F)]
operation Humidity [%RH]
Max wet bulb temperature [°C (°F)]
Downtime Temperature [°C (°F)]
(*6) Humidity [%RH]
Max wet bulb temperature [°C (°F)]
At the time of operation (Including standby)
Downtime (*9)
3
]
At the time of
operation
Downtime
Input voltage: AC200-240V
Input voltage: AC100-120V
Input voltage: AC200-240V
Input voltage: AC100-120V
27
Contents
482 (18.98)
740 (29.13)
175 (6.89) 4U
35 (77)
1656 (1570)
3 (106)
4 (141)
5 (177)
(*5)
20 to 80
29 (84.2)
0 to 50 (32 to 122)
8 to 80
29 (84.2)
(Included in
installation)
(Included in
installation)
4.0 (400) (Composite
seismic wave)
10.0 (1000)
(Composite seismic
wave)
0.15
200 to 240 VAC±10 %
100 to 120 VAC±10 %
1φ
50/60 Hz + 2/-4%
450W/475 VA
460W/485 VA
10W/40VA
10W/35 VA
More than equal to
0.95
Less than or equal to
25
Less than or equal to
3.5
CA92344-0535-06