Connection Of Signal Cable; 2.2.1 Basic Interface And Peripheral; 2.2.2 Details Of External Interface Connection; Table 2.1 Notes For Device Connection - Fujitsu PRIMEQUEST 2000 Series Hardware Installation Manual

CHAPTER 2 Connected Information
Number Configured part
*1 SB
*2 IOU
*3 MMB
*4 PCI_Box
2.2

Connection of signal cable

This section describes the notes for connection of signal cable, cable list and cable procure.

2.2.1 Basic interface and peripheral

For details of basic interface of PRIMEQUEST 2000 series and cable connection of peripheral, see
"PRIMEQUEST 2000 series system mounting"

2.2.2 Details of external interface connection

Mounting position of external interface connecting part of PRIMEQUEST 2000 series is shown in the section
below. When calculating the length of the connection cable, you should take account into the mounting
position.

TABLE 2.1 Notes for Device connection

PRIMEQUEST 2400E3/2400E2
PRIMEQUEST 2400E
PRIMEQUEST
2800E3/2800B3/2800E2/2800B2/2800E/2800B
PRIMEQUEST 2400E3/2800E3/2800B3/
2400E2/2800E2/2800B2/2400E/2800E/2800B
PRIMEQUEST 2400E3/2800E3/
2400E2/2800E2/2400E/2800E
PRIMEQUEST 2800B3/2800B2/2800B
PRIMEQUEST 2400E3/2800E3/
2400E2/2800E2/2400E/2800E
PRIMEQUEST 2800B3/2800B2/2800B
Description
Maximum 2 units can be mounted
Maximum 4 units of SB or Memory
Scale-up Board can be mounted
Maximum 2 units can be mounted
Maximum 4 units can be mounted
Maximum 4 units of IOU_1GbE or
IOU_10GbE can be mounted.
Maximum 2 units can be mounted
Maximum 1 unit can be mounted
Maximum 4 units can be mounted
No PCI_Box can be mounted.
33 CA92344-0535-06