Installing The Dt330 Terminals And Options (V4.0 Or Higher); Connecting The Dt330 Terminals And Options To The System; Special Notes; Table 2-32 Terminal Power Factor - NEC SL1100 Hardware Manual

SL1100
• CS55 DECT 6.0 technology
• CS70N DECT 6.0 technology
• CS351N DECT 6.0 technology
• CS361N DECT 6.0 technology
• Voyager 510 Bluetooth technology
Some of the above models are sold with and without the Plantronics Handset Lifter.
Refer to www.plantronics.com
The SL1100 Telephone must be equipped with the NEC WHA (Wireless Headset Adapter – P/N
BE113158).

5.10 Installing the DT330 terminals and options (V4.0 or higher)

5.10.1 Connecting the DT330 terminals and options to the system

Refer to SV8100 System H/W Manual for installing DT330 digital multiline terminals.

5.10.2 Special Notes

• The DTL-12BT-1P TEL require local AC power.
• In case of power failure mode, DT330 multiline terminal does not work even though the Built-in
Battery is connected.
• DT330 terminal does not supported the Bottom/Side/Handset options. BCH adapter is not
supported.
• The DT330 Multiline Terminal can be connected according to the following terminal power factor. Do
not connect more than this value.
IP4WW-12/24TXH-B-TEL (BK/WH)
DTL-12/24D-1P TEL (BK/WH)
DTL-12BT-1P TEL (BK)
Terminal (Power Factor)
IP4WW-12/24TXH-B-TEL (1)
DTL-12/24D-1P TEL (1.5)
DTL-12BT-1P TEL (3.5)
2-96
for details.

Table 2-32 Terminal Power Factor

Terminal Power Factor
1 KSU = < 24
Item

Table 2-33 Maximum Number of Terminal installed

Maximum Number of Terminal installed
1KSU
24
16
6
Power Factor
1
1.5
3.5
2KSU 3KSU
48 72
32 48
12 18
ISSUE 6.0
Remarks
Installation