SL1100
2.
Loosen two screws and remove the L-Bracket.
Two screws
(M4 X 8)
3.
Turn the L-Bracket upside down.
Rotate the L-Bracket 180 degrees so that the upper FACE as shown in
L-Bracket on page 2-34
and WM Hook on page
4.
Insert tabs on Battery Box into holes on L-Bracket.
Secure the L-Bracket to the Battery Box using two screws.
5.
Using two screws (M4x8), secure the WM Hook to the L-Bracket.
2-34
Figure 2-48 Removing the L-Bracket
is located at the bottom as shown in
2-35.
L-Bracket
Figure 2-48 Removing the
Figure 2-49 Securing the L-Bracket
ISSUE 6.0
Installation