Section 3 Installing The Expansion Interface Cards; General; Unpacking; Table 2-9 Expansion Cards - NEC SL1100 Hardware Manual

SL1100
S 3 INSTALLING THE EXPANSION INTERFACE CARDS
ECTION

3.1 General

Enhancements
The 000E-B1 PCB mounted on the KSU required Main software V1.3 or higher.
Up to two expansion interface cards can be installed per KSU.
Expansion Interface
Card
IP4WW-080E-B1
IP4WW-008E-B1
IP4WW-000E-B1
IP4WW-4COIDB-B1
IP4WW-2BRIDB-C1
IP4WW-1PRIU-C1
• The function of IP4WW-000E-B1 card is just a mounting card for the 4COIDB or 2BRIDB.
• The 4COIDB-B1 and 2BRIDB-C1 can be installed in following combinations;
Daughter Board
4COIDB-B1
2BRIDB-C1

3.2 Unpacking

Unpack the 080E-B1/008E-B1/000E-B1/4COIDB-B1/2BRIDB-C1/1PRIU-C1 and check it against the
following list. Inspect for physical damage.
Items
IP4WW-080E-B1
IP4WW-008E-B1
2-42

Table 2-9 Expansion Cards

8 digital extensions card
8 analog extensions card
0 trunk/extension card for ISDN BRI or Analog Trunk
4 analog trunk daughter board (Mount on the 084M-B1/080E-B1/008E-
B1/000E-B1)
2 Euro-ISDN BRI daughter board (Mount on the 084M-B1/080E-B1/008E-
B1/000E-B1)
1 Euro-ISDN PRI (E1 for Latin America) card
084M-B1
Yes
Yes

Table 2-10 Expansion Card Packing List

List of Contents
080E-B1 PCB (with PKG Spacer)
Nylon Spacers
Metal Spacers
Screws (with circular washer)
008E-B1 PCB (with PKG Spacer)
Nylon Spacers
Metal Spacers
Screws (with circular washer)
Description
Option Unit
080E-B1
Yes
Yes
ISSUE 6.0
Note
008E-B1 000E-B1
Yes Yes
Yes Yes
QTY Note
1
2
2
2
1
2
2
2
Installation