SL1100
3.3.2 Mounting the 4COIDB PCB
1.
Cut and remove specified Plastic Knockouts on the 084M-B1/080E-B1/008E-B1/000E-B1 PCB.
Plastic
Knockout
Plastic
Knockout
Figure 2-69 Plastic Knockouts on 084M-B1/080E-B1/008E-B1/000E-B1
2.
Insert two Nylon-spacers into the specified holes. Using supplied screw, fasten Metal Spacer to
4COIDB-B1 PCB.
3.
Mount the 4COIDB-B1 PCB onto the 084M-B1/080E-B1/008E-B1/000E-B1 PCB using two Nylon-
spacers and one screw. (Refer to
4.
Attach the 4COIDB Label to the specified position on the 084M-B1/080E-B1/008E-B1/000E-B1
PCB.
Nylon-Spacers
J3
084M-B1/080E-B1/008E-B1
/000E-B1 PCB
2-48
084M-B1
080E-B1/008E-B1
Figure 2-70 Installing the 4COIDB-B1 on page
J1
Figure 2-70 Installing the 4COIDB-B1
Plastic
Knockouts
4COIDB-B1 PCB
Screw
Metal-Spacer
4COIDB Label
Screw
ISSUE 6.0
000E-B1
2-48)
Installation