ISSUE 6.0
4.
Press tab A and lift the CPU support bracket.
5.
Insert the EXIFB-C1 PCB into the J1 connector on the 084M-B1 at 1228M-B KSU.
6.
Close the CPU support and make sure the tab A locks into place.
7.
Cut and remove the Plastic Knockouts as needed for Expansion KSU.
Main-Cover
8.
Replace the Main-Cover and fasten two screws.
Main-Cover
Hooks
Hardware Manual
CPU support
A
084M-B1 at 1228M KSU
Figure 2-14 EXIFB-C1 PCB Installation
Figure 2-15 Removing the Plastic Knockouts
Figure 2-16 Replacing the Main-Cover
EXIFB-C1 PCB
J1
Plastic Knockouts
Two screws
SL1100
CPU support
2-11