Diagnostics Sms Message - Siemens LOGO! CMR2040 Operating Instructions Manual

Diagnostics and maintenance

6.2 Diagnostics SMS message

You can read out or transfer diagnostics messages using the following mechanisms:
● Reading out the diagnostics buffer using the WBM
● Transferring diagnostics messages relating to errors by SMS message or e-mail
Errors can be sent as a message (SMS or e-mail). You will find the description in the
section Notifications (Page 76).
Diagnostics SMS message
Apart from the configurable sending of the diagnostics buffer, the CMR can send
standardized diagnostics SMS messages on request. A diagnostics SMS message is sent to
a telephone with an unauthorized phone number the when the receives an SMS message
with the following text from this phone:
DIAG?
For information on the content of the diagnostics SMS of the CMR see section Diagnostics
SMS message (Page 132).
6.2 Diagnostics SMS message
SMS command "DIAG?"
The reply SMS to a diagnostics request (SMS command "DIAG?") returns information with
the following structure:
Information
Module name of the CMR
Date and time of the module
Type and firmware version
Mobile wireless network status
Connected since (only with registered /
roaming)
Data service status
Connected for
Name of the network /provider
IP address
132
SMS content
From: DEVICE-Name
<YYYY-MM-DD> <hh:mm:ss>
<CMR name> <firmware version>
not registered (booked out of the network / not connected)
•
registered (booked into the network / connected)
•
not configured (not configured)
•
searching network (Network search)
•
denied (Booking in denied)
•
unknown (unknown)
•
roaming (searching)
•
invalid (invalid access data)
•
Attached for (ddd:hh:mm:ss) <ddd>:<hh>:<mm>:<ss>
For the possible entries see "Mobile wireless network status" above.
Attached for (ddd:hh:mm:ss) <ddd>:<hh>:<mm>:<ss>
Network: <Network name>
IP: xxx.xxx.xxx.xxx
If no IP address exists: IP: -
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040