Siemens LOGO! CMR2040 Operating Instructions Manual page 149

● ETSI EN 301 908-13
IMT cellular networks. Harmonized standard covering the essential requirements of article
3.2 of the R&TTE directive. Part 13: Evolved Universal Terrestrial Radio Access
(E-UTRA) User Equipment (UE)
Maximum antenna gain
Users and installers must be provided with antenna installation instructions and transmitter
operating conditions that must be followed to avoid exceeding the permitted RF exposure.
Note the technical specifications of the antenna, refer to Appendix Antennas (Page 155).
RoHS directive
The product meets the requirements of the EU directive 2011/65/EC on the restriction of the
use of certain hazardous substances in electrical and electronic equipment.
Applied standard:
● EN 50581
cULus
● UL 60950-1 (Information Technology Equipment - Safety - Part 1: General Requirements)
● CSA C22.2 No. 60950-1-07 (Information Technology Equipment - Safety - Part 1:
General Requirements)
● UL 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use - Part 1: General Requirements)
● UL 61010-2-201 (Part 2-201: Particular Requirements for Control Equipment)
● CAN/CSA C22.2 No. 61010-1-12 (Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use - Part 1: General Requirements)
● CAN/CSA-IEC 61010-2-201 (Part 2-201: Particular Requirements for Control Equipment)
cULus HAZ.LOC.
Underwriters Laboratories, Inc., Certificate / Report No. E240480
● ISA 12.12.01 (Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and
Class III, Divisions 1 and 2 Hazardous (Classified) Locations)
● CSA C22.2 No. 213 (Hazardous Location)
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T4; Ta = -20 °C...+70 °C
● Cl. 1, Zone 2, GP. IIC T4; Ta = -20 °C...+70 °C
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
Approvals
149