Access Levels - Panasonic KX-NCP500 Pc Programming Manual

2.1.2 Access Levels

Setting
Port Number
2.1.2 Access Levels
There are three main levels of access to the Maintenance Console: User, Administrator and Installer. Each
level has its own Programmer Code, which must be entered to run the Maintenance Console. The allowed
format for each programmer code is as follows:
User Level Programmer Code
Administrator Level Programmer Code
Installer Level Programmer Code
Access to menu options within the Maintenance Console is restricted depending on the Programmer Code,
and the current software mode (see 2.1.1 Starting Maintenance Console and Software Modes). When a
menu option is limited to certain access levels, this is noted in this manual in the initial description of that menu
option, for example:
"This option is only available at Installer level."
If a sentence like this does not appear under the heading, the menu option is available at all levels.
The target users for each access level are as follows:
Access Level
User
Administrator
Installer
The options available in each mode and access level are shown below.
The access levels are abbreviated as follows:
U: User; A: Administrator; I: Installer
A check mark indicates that the menu option is available for that access level.
Program launcher
New
Open
Connect—RS-232C
20 PC Programming Manual
Values
1–65535
Item
Menu Option
Explanation
Specify the port number used to
access the PBX via LAN. Enter
the same port number that was
input in
Number of 3.4 [1-1] Slot—
Card Property - IPCMPR.
Length
0 – 16 characters
4 – 16 characters
4 – 16 characters
User
For end users
For system administrators
For dealers and system installers
Batch
U A I U
ü
ü ü ü ü
ü ü ü ü
Maintenance Port
Interactive
A I
ü
ü ü
ü ü
Document Version 2009-12