Utility-File Transfer Ftp To Ip Equipment-Nt3Xx; Utility-Card Software Timed Update - Panasonic KX-NCP500 Pc Programming Manual

2.6.21 Utility—Card Software Timed Update
•
To display the file version of the file stored on the FTP server, click Load.
•
To refresh the status of all ports, click Refresh.
•
Timed updates can only be set for either LPR cards, IP-CSs, or KX-NT400 IP-PTs. They cannot be set
for more than one type of device.
2.6.20 Utility—File Transfer FTP to IP Equipment—NT3xx
Displays a list of files on the FTP server, and allows you to update the programs stored in KX-NT300 series
IP-PTs.
This option is only available at Installer level.
To perform an update
1.
From the Utility menu, select File Transfer FTP to IP Equipment, and then NT3xx.
2.
Input the FTP Server Address and File Name.
3.
Click Execute.
Note
•
This utility is not available when the PBX is connected to the Maintenance Console via a LAN
connection.
•
Ports cannot be selected. All registered ports that are in OUS status will be activated, and then reset
when the update is complete.
•
To display the version and file type of the file stored on the FTP server, click Load.
•
FTP server passwords and user IDs can only contain capital letters and numbers.
2.6.21 Utility—Card Software Timed Update
Updates programs in the LPR cards (optional service cards with local processors) by comparing them with
files found on the SD memory card on a preset schedule, and downloading newer files to the cards.
This option is only available at Installer level.
Note
•
Timed updates can only be set for either LPR cards, IP-CSs, or KX-NT400 IP-PTs. They cannot be set
for more than one type of device.
•
Cards are automatically set to OUS status during an update, and returned to INS status when the
update is complete.
•
It is recommended to set the timed update to take place during the least active time period, for example
late at night.
This utility does not apply to CS programs. These must be updated manually using the SD Card File View
and Load utility (see 2.6.4 Utility—SD Card File View and Load).
When this utility has been set, all commands that would affect the status of cards are prevented from operating.
The list of these commands is as follows:
•
Card status change (INS/OUS)
•
Diagnosis commands
•
Card installation
•
Card deletion
•
Remote reset
•
LPR program download requests
•
Signaling Bit Monitor requests (T1)
•
Line trace start requests (T1)
•
ISDN/QSIG Protocol Data Trace start requests
58 PC Programming Manual Document Version 2009-12