Utility-Ps Information - Panasonic KX-NCP500 Pc Programming Manual

Pure ip-pbx
Hide thumbs Also See for KX-NCP500:
Table of Contents

Advertisement

This option is only available at Installer level, and requires that the target DHLC, DLC, or V-IPCS4 card be set
to INS status.
The displayed items are as follows:
Item
Slot
Port
CS Name
Status
Version
Revision
CSID
Path
Group Call
To view CS information
1.
From the Utility menu, select CS Information.
2.
From the Target CSI/F Slot No drop-down list, select the target slot.
To display information on a single card, select the slot number and name of that card.
To display information on all matching cards, select "All".
3.
From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
4.
Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click Refresh.
5.
Click Stop to end monitoring.
6.
Select an option:
Click Capture if you want to save the displayed information.
1.
Enter a file name, or select a file to overwrite.
2.
Click Start.
Click Close to return to the main screen.
2.6.16 Utility—PS Information
Displays Portable Station (PS) registration information, including the associated Cell Station (CS).
This option is only available at Installer level.
Document Version 2009-12
Description
Number of the slot
Number of the port
Name of the attached CS
Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left
blank.
Version number of the program file stored in the CS
Revision number of the program file stored in the CS
12-digit ID number of the CS
Number of the wireless extension currently using each path. In the case
of a group, several extensions may be using the same floating extension
number.
When an extension number is not registered, the display shows
"OFF". Both 2.4 GHz PSs and DECT PSs can use up to 2 paths. When
using high-density CSs or IP-CSs, DECT PSs can use up to 8 paths.
Number of PSs registered to the attached CS that are members of a PS
Ring Group.
2.6.16 Utility—PS Information
PC Programming Manual
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-ncp1000

Table of Contents