Panasonic KX-NCP500 Pc Programming Manual page 367

13.1.23 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation)
and CNIP/CONP (Calling/Connected Name Identification Presentation)
CLIR Set / Cancel
Specifies the feature number used to set or cancel CLIR, which suppresses the presentation of the caller's
number to the called party.
Default
*7*1
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
3.31 [1-1] Slot—Port Property - PRI Port—Supplementary Service—
CNIR, CONR, CF (Rerouting), CT, CCBS, E911
Feature Manual References
3.1.15 CLIP (Calling Line Identification Presentation)
13.1.23 Private Network Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation)
and CNIP/CONP (Calling/Connected Name Identification Presentation)
Switch CLIP of CO Line / Extension
Specifies the feature number used to send either the CLIP number of the CO line in use (subscriber's number)
or the extension to the network.
Default
*7*2
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
3.31 [1-1] Slot—Port Property - PRI Port—CO Setting—
6.1 [4-1-1] Wired Extension—Extension Settings—ISDN CLIP—
6.10 [4-2-1] Portable Station—Extension Settings—ISDN CLIP—
Document Version 2009-12
4.9 [2-6-1] Numbering Plan—Main
COLP, CLIR, COLR, CNIP, CONP,
Subscriber Number
CLIP ID
CLIP ID
PC Programming Manual 367