Panasonic KX-NCP500 Pc Programming Manual page 297

Feature Card Type
Indicates the type of option card that is installed or pre-installed in each sub-slot (reference only).
Note that only one ECHO16 card can be installed per OPB3 card.
Default
Current card type
Value Range
MSG4: 4-Channel Message Card
DPH4: 4-Port Doorphone Card
ECHO16: 16-Channel Echo Canceller Card
EIO4: 4-Port External Input/Output Card
ESVM4: 4-Channel Simplified Voice Message Card
Maintenance Console Location
3.36 [1-1] Slot—OPB3 Card Property
Installation Manual References
1.2.1 Optional Equipment
Programming Manual References
3.38 [1-1] Slot—OPB3 Option Card Setup
Feature Manual References
None
Status
Indicates the status of the option card in each slot (reference only).
This column offers two ways to open the screen to select the card command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The card is in service.
OUS: The card is out of service.
Fault: The card has been removed from the sub-slot, or is not communicating with the PBX.
Pre-Install: There is no card in the sub-slot, but the card type is programmed for the sub-slot.
Idle: There is no card in the sub-slot, no programming of the card type for the sub-slot.
Maintenance Console Location
3.36 [1-1] Slot—OPB3 Card Property
Document Version 2009-12
3.36 [1-1] Slot—OPB3 Card Property
PC Programming Manual 297