Record Effect Options - Philips 250ML Operation Manual

250ML Lighting Control Consoles
• Once the submaster is recorded, the submaster's bump button will be lit in purple and the channel's levels will still
be active in red. Press [CLR] [CLR] to release and now the submaster shall function correctly.
• At this point the playback submaster will function as a normal submaster simply because there is only one set of
stored data. Repeat the process of setting levels and recording into the same submaster
[RECORD][BUMP][ENTER] to store the second set of levels to the same submaster.

Record Effect Options

When the effect's bump button is pressed, the following effect screen will appear as shown in Figure 55.
S1 - Bump:
This option determines the submaster's bump button action.
• Off - bump button is disabled.
S2 - Color, S3 - Beamshape, and S4 - Position:
Color refers to all Color parameters, Beamshape refers to all beam related parameters and Position refers to pan / tilt
and any other position related parameters.
• Snap - color, beam and position values shall output to their stored values in a zero time when the cue is activated.
• Fade - color, beam and position values shall fade with the transition of the cue using the time of the cue.
• Snap@100% - color, beam and position values shall output to the stored values in a zero time when the cue is com-
pleted.
S5 - Direction:
This option determines the path in which the effect will run.
• Forward - runs in numerical order (1...2...3...).
• Backwards - runs in reverse numerical order (3...2...1...).
• Bounce - runs in numerical order then in reverse order (1...2...3...2...1...).
• Random - runs in a randomized order.
S6 - Insert:
This option will store the current values and add a step prior to the existing step.
S7 - Delete (Chase):
This setting will delete the selected effect. Once (S7) is pressed, this operation must be aborted or confirmed. Press
(S9 - Exit) to abort or Press (S10 - Enter) to confirm.
WARNING! Once executed, this command cannot be reversed.
S8 - Delete (Step):
This setting will delete the selected step of the effect. Once (S7) is pressed, this operation must be aborted or
confirmed. Press (S9 - Exit) to abort or Press (S10 - Enter) to confirm.
Figure 55: Record Effect Options
Operation Guide
38
Recording an Effect