250ML Lighting Control Consoles
Operation Guide
Figure 70: Applying a Palette
Once the palette has been applied and all output is correct, the fixture can be stored into a fader or cue.
Accessing Fixtures using Channel Numbers
All fixtures shall display a 900 series number as the softkeys label on the color screen. This is a channel alias and
shall allow access of the fixture from the numerical keypad. For example, the first fixture patched will have a channel
alias of 901. From the Command Line, press [9] [0] [1] [ENTER]. This shall have the same effect as selecting the S1
softkey.
20. Focus
The Focus button, [F2], is the point of information for all focus positions that are recorded in the current showfile.
Each type of focus point (Position, Color and Beam) are available and can be manipulated here.
Figure 71: Focus List Screen
Use Encoder D to move up and down the focus list. The selected type of focus point will be highlighted in the white
background bar. Press (S9-Show List) to see the list of each type or Encoder A - Exit to return to the previous screen.
4 7
OPERATION