Home - Philips 250ML Operation Manual

250ML Lighting Control Consoles
Operation Guide
Once a moving light is properly patched, fixtures can be accessed by pressing the FIXTURE button.
The patched fixtures shall appear on the S keys. By selecting a fixture, the appropriate S key shall flash.
Multiple fixtures can be manipulated at the same time by selecting multiple S keys. Multiple S keys will
be lit red if they are active although only one will flash. The flashing fixture shall be the one displayed on
the monitor even though the other selected fixtures are being affected.
The LCD screen shall identify the fixture page. Page 1 shall access fixtures 1 thru 10. Page 2 shall access fixtures 11
thru 20 and page 3 shall access fixtures 21 thru 30. Use the Arrow Up and Arrow Down keys next to the LCD screen
to change fixture pages.
Basic attributes like Intensity shall appear on the color screen and are accessed from Encoders A thru D.
Figure 64: Automated Luminaire Control
Engaging the encoder shall change the values for the selected attribute. When the attribute's value has been changed,
the background shall change to white and the numbers shall advance.

Home

The HOME button shall take the selected fixtures attributes back to their default position and deselect the
attributes.
Example: Select the first fixture by pressing (S1) button. If this fixture has intensity, that will be available
on Encoder A sitting in its default value unchanged.
Figure 65: Intensity Control
Now adjust Encoder A and the intensities value shall change plus the background has changed to white. This
indicates that the value has been changed.
Figure 66: Intensity Control (Value Change)
44
Basic Automated Luminaire Control