LG PQNFB17C1 Installation And User Manual page 124

Installing ACP BACnet
112
The network address consists of four 3-digit numbers. In case of setting the network address, the,
name of the related address is displayed on the LCD of the ACP BACnet, and press Up/Down/Left/
Caution
Setting the network address
The network address can be separated to 4 digits based on ., and each number shall be 255
or less.
Number exceeding 255 may not be input.
Notes
Assigning the network address
Network address shall be assigned by the person in charge of the network of the
corresponding site. (IP address, Gateway address, Net mask)
ACP BACnet can use both fixed IP type and dynamic IP type, but fixed IP type is
recommended, and if dynamic IP type is used, it may cause inconvenience of the customer.
If fixed IP type is used, network address (IP address, Gateway address, and Net mask) shall
be assigned by the person in charge of the network of the corresponding site.
[Set IP Address]
192.168.000.000
Click
button [Set IP Address]
192.167.000.000
[Set IP Address]
192.168.000.000
Click
[Set IP Address]
button
192.168.000.000