Motorola Cleartone CM5000 Basic Service Manual page 44

30
STEP 1
Set the IFR to the following parameter in system parameters.
(MAX TX LEVEL) to 40 dBm
STEP 2
RF Gen Level
-112 dBm
STEP 3
Channel Plan
Set to "USER DEFINED"
STEP 4
Channel Block setting in "User Defined" menu
i) Select "CHANNEL BLOCK 1" and enter the following parameters:
CHANNEL BLOCK
LOWEST CHANNEL
HIGHEST CHANNEL
LOWEST CHANNEL TX FREQUENCY
DUPLEXT OFFSET
CHANNEL SPACING
ii) Select "CHANNEL BLOCK 2" and enter the following parameters:
CHANNEL BLOCK
LOWEST CHANNEL
HIGHEST CHANNEL
LOWEST CHANNEL TX FREQUENCY
DUPLEXT OFFSET
CHANNEL SPACING
iii) Select "CHANNEL BLOCK 2" and enter the following parameters:
CHANNEL BLOCK
LOWEST CHANNEL
HIGHEST CHANNEL
LOWEST CHANNEL TX FREQUENCY
DUPLEXT OFFSET
CHANNEL SPACING
iv) Select "CHANNEL BLOCK 2" and enter the following parameters:
CHANNEL BLOCK
LOWEST CHANNEL
HIGHEST CHANNEL
LOWEST CHANNEL TX FREQUENCY
DUPLEXT OFFSET
CHANNEL SPACING
For A Band (380 - 400 MHz)
A) Normal setting:
STEP 4
i) Press the (USER DEFINED KEY) and set the following parameters:
FREQ BAND
OFFSET
DUPLEX SPACING
REVERSE
CM5000 Mobile Repeater/Gateway - Basic Service Manual TEST SETUP & ADJUSTMENT
EXCLUDED
0000
4095
290.0125 MHz
10 MHz
25 kHz
EXCLUDED
0000
4095
310.0125 MHz
-10 MHz
25 kHz
EXCLUDED
0000
4095
390.0125 MHz
10 MHz
25 kHz
EXCLUDED
0000
4095
410.0125 MHz
-10 MHz
25 kHz
3
3
0
0