Indicated Fault List; Show Pre-Alarms - Siemens FT2010 Operation Manual

6.7.2
6.7.3
Building Technologies
Fire Safety

Indicated fault list

If a 'Fault' has occurred and is the only 'Event' in the configured visibility, this
'Event' is shown on the display.
If other 'Events' or conditions have occurred, such as 'Isolation' or an 'ALARM', the
most important 'Event', or the most important condition, respectively, is indicated
on the display.
Indication of the fault list
A button is configured with the 'Show' 'Fault' function
The button is labelled accordingly
Press <'Show' 'Fault'>.
The fault list is indicated on the display.
Example for a fault list with two 'Faults':
002 Faults
Device missing
Office Room 123
Dev.location fault
Corridor 3rd floor
–––– ––––––––––––––––––––––––––––––––––
Example of fault list
See also
Maximum number of events that can be displayed [

Show pre-ALARMS

All 'Pre-ALARMS' which have occurred can be displayed in the configured visibility.
Displaying the 'Pre-ALARMS' list
A button is configured with the 'Show' 'Pre-ALARMS' function
The button is labelled accordingly
Press <'Show' 'Pre-ALARMS'>.
All 'Pre-ALARMS' which have occurred within the configured visibility are
indicated on the display.
Operation
Indicating and scrolling in lists
Zone
Zone
–––––––––––––––––––––––––––
6
1/1
3/1
–––
14]
25
009310_i_en_--
2013-11-14