Climatic And Mechanical Environmental Conditions; Shipping And Storage Conditions - Siemens SINUMERIK 840D sl Manual

EMC limit values in South Korea
The EMC limit values to be complied with for South Korea correspond to the limit values of the
EMC product standard for variable-speed electric drives EN 61800-3, Category C2, or limit
value class A, Group 1 according to EN 55011. By applying suitable supplementary measures,
the limit values according to Category C2 or according to limit value class A, Group 1, are
maintained. Further, additional measures may be required, for instance, using an additional
radio interference suppression filter (EMC filter).
The measures for EMC-compliant design of the system are described in detail in this manual
respectively in the Installation Guideline EMC.
Please note that the final statement on compliance with the standard is given by the respective
label attached to the individual unit.
4.2

Climatic and mechanical environmental conditions

4.2.1

Shipping and storage conditions

The components of the SINUMERIK 840D sl system exceed the requirements according to
EN 61800‑2 with regard to shipping and storage conditions.
The following data applies under the following conditions:
● Long-term storage in the transport and product packaging:
● Transport in the transport packaging:
Table 4-1
Type of condition
Classification
Climate class
Ambient temperature
NCU 7x0.3 PN, NCU 7x0.3B PN
Manual, 06/2014, 6FC5397-1EP40-5BA1
At weather-protected locations that have continuous contact with outside air through
openings.
– In unventilated containers under conditions not protected from weather effects.
– In the "cold" in accordance with outside air.
– Air transport in the air-conditioned cargo hold.
Ambient conditions during storage and transport
4.2 Climatic and mechanical environmental conditions
Permissible range/class
Transport
EN 60721‑3‑2
2K4
From -40° C to +70° C
Application planning
Storage
EN 60721‑3‑1
1K4
From -25° C to +55° C
33