Siemens S7-1200 TELECONTROL Operating Instructions Manual page 123

RoHS
The CP meets the requirements of the EU directive 2011/65/EC on the restriction of the use
of certain hazardous substances in electrical and electronic equipment.
Applied standard:
● EN 50581
cULus
Underwriters Laboratories Inc. meets
● Underwriters Laboratories, Inc.: UL 61010-1 (Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use - Part 1: General
Requirements)
● IEC/UL 61010-2-201 (Safety requirements for electrical equipment for measurement,
control and laboratory use. Particular requirements for control equipment)
● Canadian Standards Association: CSA C22.2 No. 142 (Process Control Equipment)
cULus HAZ.LOC.
Underwriters Laboratories Inc. meets
● ANSI ISA 12.12.01
● CSA C22.2 No. 213-M1987
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T4A; Ta = -20 °C...60 °C
● Cl. 1, Zone 2, GP. IIC T4; Ta = -20 °C...60 °C
Ta: Refer to the temperature class on the type plate of the CP
Note the conditions for the safe deployment of the CP according to the section Notices
regarding use in hazardous areas according to UL HazLoc (Page 31).
FM
Factory Mutual Research (FM)
Approval Standard Class number 3600 and 3611
Approved for use in:
Class I, Division 2, Group A, B, C, D, Temperature Class T4A, Ta = 60 °C
Class I, Zone 2, Group IIC, Temperature Class T4, Ta = 60 °C
Australia - RCM
The CP meets the requirements of the AS/NZS 2064 standards (Class A).
CP 1242-7 GPRS V2
Operating Instructions, 10/2016, C79000-G8976-C311-02
Approvals
123