Panasonic KX-NS700 Installation Manual page 157

Hybrid ip-pbx
Hide thumbs Also See for KX-NS700:
Table of Contents

Advertisement

Baud Rate (bps)
Flow Control
Command
5.
Enter Password.
6.
Click Connect button.
Connection via PRI23 Card (KX-NS5290)
ISDN MODEM
PC
To connect a PC to the Main Unit
1.
Start Off-line WebMC launcher.
2.
Click the Connect-Online Mode(C) button.
3.
Select the ISDN Remote tab.
4.
In Telephone Number, enter a telephone number.
5.
In Password, enter the password.
6.
Click the Connect button.
MNT Port
By connecting a USB-LAN adaptor to the USB port you can access the PBX over a LAN.
Notice
When connecting the PC to the MNT port, if the PC is set to obtain the IP address automatically, the
IP address of the PC will be set to an appropriate IP address to establish a connection to the PBX.
Only recommended USB-LAN adaptors can be used. For information on recommended products,
consult you dealer.
Document Version 2016-03
ISDN Line
Network
PRI23 Card (KX-NS5290) is installed
in KX-NS700
5.2 PC Connection
Installation Manual
157

Advertisement

Table of Contents
loading

Table of Contents