Panasonic KX-NS700 Installation Manual page 209

KX-NT551
After assigning
the IP addresses
Select "Enable"
for LLDP setting.
To set the VLAN ID for the primary port
Select "LLDP (Primary)".
VLAN Priority
0–7
To set the VLAN ID for the secondary port
Select "LLDP (Secondary)".
Select "Priority".
To set the Interval time for LLDP
Select "LLDP (Secondary)".
Press SP-PHONE.
To end programming
Press HOLD three
times to return to the
Menu screen.
*1 The VLAN ID and the VLAN priority are set automatically for the primary port; these are reference only. However, the VLAN ID and
the VLAN priority for secondary port must be set manually.
*2 The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
the priority.
Document Version 2016-03
Select "QoS". Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Select "VLAN ID".
*1*2
Press SP-PHONE.
*1*2
VLAN Priority
0–7
Press SP-PHONE.
Press STORE.
Select "LLDP".
VLAN ID
0–4094
VLAN ID
0–4094
Select "VLAN ID".
Press SP-PHONE.
Press SP-PHONE.
Select "LLDP (Interval)".
The IP-PT will reboot
and can then be
registered to the PBX.
5.7.3 Setting LLDP Parameters
Press SP-PHONE.
*1
Select "Priority".
*1
Press SP-PHONE.
INTERVAL
1–3600
Installation Manual 209