Setting Lldp Parameters - Panasonic KX-NS700 Installation Manual

5.7.3 Setting LLDP Parameters

KX-NT553/KX-NT556
After assigning
the IP addresses
To set the VLAN ID for the primary port
Select "Primary port".
Select "VLAN Priority".
To set the VLAN ID for the secondary port
Return to the
LLDP setting screen.
*1
VLAN ID
0–4094
To set the Interval time for LLDP
Return to the
LLDP setting screen.
INTERVAL
1–3600
To end programming
Return to the
Menu screen.
*1 The VLAN ID and the VLAN priority are set automatically for the primary port; these are reference only. However, the VLAN ID and
the VLAN priority for secondary port must be set manually.
*2 The VLAN priority of the primary port must be set higher than the priority of the secondary port. The larger the number, the higher
the priority.
208 Installation Manual
Select "QoS".
ENTER
ENTER Select "VLAN ID".
VLAN Priority
ENTER
Select ENTER
"Secondary port".
ENTER Select
"VLAN Priority".
Select ENTER
"LLDP (Secondary)".
ENTER
STORE
Press "STORE".
Select "LLDP". ENTER
ENTER
*1*2
0–7
Select "VLAN ID".
VLAN Priority 1
ENTER 0–7
Select "LLDP (Interval)".
The IP-PT will reboot
and can then be
registered to the PBX.
Select "Enable" for
LLDP setting.
*1
VLAN ID
0–4094
ENTER
*1*2
ENTER
ENTER
Document Version 2016-03