Display And Operation Settings (Got Set Up); Display Settings; Display Functions - Mitsubishi Electric GOT2000 Series User Manual

12. DISPLAY AND OPERATION SETTINGS (GOT SET UP)

The setting screens related to the display or operation can be displayed from the utility screen.
In the setting screen for display and the setting screen for operation, the following settings can be set.
Item

Display settings

Operation
12.1 Display Settings
12.1.1

Display functions

Setting regarding display is possible.
The items which can be set are described below. If touch the each item part, the respective setting becomes possible.
Item
Opening time
Screen save time
Brightness
Setting the startup screen display time and screen saving time
Brightness
Turning on/off the POWER LED (GT2105-Q only)
Setting buzzer volume, window move buzzer, and key reaction
Touch panel calibration
Utility call key
Description
The title display period at the main unit boot can be set.
The period from the user stops the touch panel operation
till the screen save function starts can be set.
Brightness can be adjusted.
➠
■2. Brightness
POINT POINT POINT
(1) Display setting by GT Designer3
Set title display period, screen save time and screen save backlight by selecting [Common]
→ [GOT Environmental Setting] → [GOT Setup...] on GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after
downloading the project data.
➠
GT Designer3 (GOT2000) Help
(2) Screen save time
By using the system information function, the screen save function can forcibly enabled from
a controller (Forced Screen Saver Disable Signal) or the screen saving time set in the utility
can be disabled (Automatic Screen Saver Disable Signal).
➠
GT Designer3 (GOT2000) Help
Description
0 to 60 seconds
(At factory shipment: 1 seconds)
0 to 60 minutes
(At factory shipment: 0 minute)
-
12.1 Display Settings
Reference
➠
12.1.1
➠
12.2.3
➠
12.2.4
➠
12.2.4
Setting range
12
12 - 1