Mitsubishi Electric GOT2000 Series User Manual page 454

■3. Utility call key setting operation
Step 1.
Touch
every time it is pressed. Change the part to be set as a key position to
For the key position, 0 or 1 point can be specified.
Step 2.
When setting 1 point, specify the time to switch to the utility in case of keeping pressing the key position.
Touch the time input area.
Step 3.
Touching the input area displays a keyboard.
Input numeric with the keyboard.
Step 4.
Touch the
12 - 12
12.2 Operation Settings (Settings for Operation)
or displayed at the four corners of the setting screen. The button repeats
button to save the changes.
POINT POINT POINT
(1) When the utility call key is not set (set to 0-point)
Even when the utility call key is not set (set to the zero point), you can display the main menu
by performing the following operation.
• Pressing the special function switch set on the user-created screen
➠ 9.3.1 Display operation of main menu
(2) When limiting the display and operation of the utility
When limiting the display and operating users, set a password to the GOT using GT
Designer3. If a user tries to display the main menu of the utility, the password is displayed.
Refer to the following for the details related to the password setting.
➠
GT Designer3 (GOT2000) Help
.