Hitachi EH-150 Applications Manual page 29

(2) Input items
Input items that can be configured in Ethernet parameters window are shown in Table 5.6.
Table 5.6
No Name
IP Address Set
1) MAC Address
2) IP address
3) Subnet mask
4) Default gateway
5) Transfer speed / Type To set transfer speed and type
Other station for Diagnosis
6) IP Address
7) Port No.
Task Code Logical Port No. Set
8) Task Code Port
Timeout
9) Timeout value
Task code port m (m[1:4])
10-m) Port No.
11-m) Protocol
(3) Operation buttons
The window has the five operation buttons shown below.
Table 5.7
Online
Offline
Set
Default Set
Close
When you click the "Set" button, EH-ETH2 Configurator will check the parameters. If all parameters are
correct, they will be saved into set up file, and the completion massage box will appear. If they are wrong, set
up file is not updated. In this case, please check and correct the value, and set again.
Input items of Ethernet parameters window
Description
To confirm the MAC address of EH-ETH2
To set the IP address of EH-ETH2
To set the Subnet mask of EH-ETH2
To set the Default gateway address of EH-ETH2
To set the destination IP address of EH-ETH2's testing.
To set the destination Port number of EH-ETH2's
testing.
To set the timeout of Task code connection is enable or
not. This value is valid for all Task code connections. If
this is specified as disable, the value of item (9) is not
valid.
To set the value for timeout of Task code connection and
this unit is second. This value is valid for all Task code
connections.
To set the logical port number for Task code connection. Between 1 and 65535
To select the protocol for Task code connection.
Operation buttons of Ethernet parameters window
Name
To connect to EH-ETH2. At this time, the present values are overwrtiten in
each input boxes.
To disconnect from EH-ETH2.
To set the values in the input boxes.
To set the default values.
To close the window.
Chapter 5 Configuration of Communication parameters
Description
5-9
Range for setting
Confirming only
Except 0.0.0.0 and 255.255.255.255
Between 255.0.0.0 and 255.255.255.248
Except 255.255.255.255
Auto Negotiation (0),
100Mbps Full Duplex (1),
100Mbps Half Duplex (2),
10Mbps Full Duplex (3),
10Mbps Half Duplex (4)
Except 0.0.0.0 and 255.255.255.255
Between 1 and 65535
Enable (0), Disable (1)
Between 0 and 65535
TCP/IP (0), UDP/IP (1)