Hitachi EH-150 Applications Manual page 43

(3) Operation buttons
The window has the four operation buttons shown below.
Table 5.17
Name
Online
Offline
Set
Close
When you click the "Set" button, EH-ETH2 Configurator will check the parameters. If all parameters are
correct, they will be saved into set up file, and the completion massage box will appear. If they are wrong, set
up file is not updated. In this case, please check and correct the value, and set again.
[ The relation between the setting of ASR Connection Timeout and Open Retry Times / Interval ]
Both ASR Connection Timeout and Open Retry Times / Interval are the parameters to open the connection.
The former is used for all ASR connections. The latter are configured on each ASR connections.
If both ASR Connection Timeout and Open Retry Times / Interval are valid setting, the module detects the
open error after progress in time of the one that setting time has a short.
Chapter 5 Configuration of Communication parameters
Operation buttons of ASR Connection Setting window
To connect to EH-ETH2. At this time, the present values are overwrtiten in
each input boxes.
To disconnect from EH-ETH2.
To set the values in the input boxes.
To close the window.
5-23
Description