Entry Into The Maintenance Mode - Brother MFC640CW Service Manual

8.1 ENTRY INTO THE MAINTENANCE MODE

MFC820CW/640CW
Press the Menu/Set (Menu) and Black Start keys. Next press the
machine enter the maintenance mode.
TIP: FAX models equipped with numerical keypads can enter the maintenance mode in the same
way as conventional models; that is, by pressing the Menu/Set (Menu), *, 2, 8, 6 and 4 keys in this
sequence.
DCP340CW
Press the Menu and Mono Start keys. Next press the
the maintenance mode.
The machine beeps for approx. one second and displays "
indicating that it is placed in the initial stage of the maintenance mode, a mode in which the machine
is ready to accept entry from the keys.
To select one of the maintenance-mode functions listed in
digit function code with the numerical keys on the control panel. (The details of each maintenance-
mode function are described in
NOTES • MFC820CW/640CW
• Pressing the Stop/Exit key after entering only one digit restores the machine to the
• If an invalid function code is entered, the machine resumes the initial stage of the
Section
To exit from the maintenance mode and switch to standby, press the 9 key twice in the
initial stage of the maintenance mode.
DCP340CW
To exit from the maintenance mode and switch to standby, enter 9 twice by using the
and Set keys in the initial stage of the maintenance mode.*
(*To enter a numerical code on models having no numerical keypad, press the
times to display the numerical code to be entered and then press the Set key. Repeat this
operation for each numerical code.)
initial stage of the maintenance mode.
maintenance mode.
(Key names enclosed in parentheses apply to the MFC820CW.)
key four times to make the machine enter
Section 8.2,
8.4.)
8- 1
key four times to make the
" on the LCD,
enter the corresponding 2-
key several
Confidential