Configuring A Pw; Configuring A Pw Class; Configuring A Static Pw; Configuring An Ldp Pw - HP 10500 Series Configuration Manual

Configuring a PW

Configuring a PW class

You can configure PW attributes such as the PW type in a PW class. PWs with the same attributes can
reference the same PW class.
To configure a PW class:
Step
1. Enter system view.
2. Create a PW class and enter
PW class view.
3. (Optional.) Specify the PW
type.

Configuring a static PW

Step
1. Enter system view.
2. Enter cross-connect group
view.
3. Enter cross-connect view.
4. Configure a static PW and
enter PW view.

Configuring an LDP PW

Before you configure an LDP PW, enable global and interface MPLS LDP on the PE. For information about
MPLS LDP configuration, see
To configure an LDP PW:
Step
1. Enter system view.
2. Enter cross-connect group
view.
3. Enter cross-connect view.
Command
system-view
pw-class class-name
pw-type { ethernet | vlan }
Command
system-view
xconnect-group group-name
connection connection-name
peer ip-address pw-id pw-id
in-label label-value out-label
label-value [ pw-class class-name |
tunnel-policy tunnel-policy-name ] *
"Configuring LDP."
Command
system-view
xconnect-group group-name
connection connection-name
232
Remarks
N/A
By default, no PW class is created.
By default, the PW type is VLAN.
Remarks
N/A
N/A
N/A
By default, no static PW is
configured.
Remarks
N/A
N/A
N/A