HP 10500 Series Configuration Manual page 42

Step
1. Enter system view.
2. Create a RIPng process for
an IPv6 VPN instance and
enter RIPng view.
3. Redistribute the VPN
routes.
4. (Optional.) Configure the
default cost value for the
redistributed routes.
5. Return to system view.
6. Enter interface view.
7. Enable the RIPng process
on the interface.
Configuring OSPFv3 between an IPv6 MCE and a PE
Step
1. Enter system view.
2. Create an OSPFv3
process for an IPv6 VPN
instance and enter
OSPFv3 view.
3. Set the router ID.
4. Redistribute the VPN
routes.
5. (Optional.) Configure a
filtering policy to filter
advertised routes.
6. Return to system view.
7. Enter interface view.
8. Enable the OSPFv3
process on the interface.
Configuring IPv6 IS-IS between an IPv6 MCE and a PE
Step
1. Enter system view.
2. Create an IS-IS process
for an IPv6 VPN
instance and enter IS-IS
view.
Command
system-view
ripng [ process-id ] vpn-instance
vpn-instance-name
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | route-policy
route-policy-name ] *
default cost value
quit
interface interface-type interface-number
ripng process-id enable
Command
system-view
ospfv3 [ process-id ] vpn-instance
vpn-instance-name
router-id router-id
import-route protocol [ process-id |
allow-ibgp ] [ cost value | route-policy
route-policy-name | type type ] *
filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name } export [ bgp4+ |
direct | isisv6 process-id | ospfv3
process-id | ripng process-id | static ]
quit
interface interface-type
interface-number
ospfv3 process-id area area-id
[ instance instance-id ]
Command
system-view
isis [ process-id ] vpn-instance
vpn-instance-name
36
Remarks
N/A
N/A
By default, no route of any
other routing protocol is
redistributed into RIPng.
If you do not specify a default
cost, the default cost is 0.
N/A
N/A
By default, RIPng is disabled
on an interface.
Remarks
N/A
N/A
N/A
By default, no route of any other
routing protocol is redistributed
into OSPFv3.
By default, redistributed routes
are not filtered.
N/A
N/A
By default, OSPFv3 is disabled
on an interface.
Remarks
N/A
N/A