HP 10500 Series Configuration Manual page 287

[PE3] vsi aaa
[PE3-vsi-aaa] pwsignal ldp
[PE3-vsi-aaa-ldp] peer 1.1.1.9 pw-id 500
[PE3-vsi-aaa-ldp-1.1.1.9-500] quit
[PE3-vsi-aaa-ldp] peer 2.2.2.9 pw-id 500
[PE3-vsi-aaa-ldp-2.2.2.9-500] quit
[PE3-vsi-aaa-ldp] quit
[PE3-vsi-aaa] quit
# Create service instance 10 on Ten-GigabitEthernet1/0/1, and bind the service instance to the
VSI aaa.
[PE3] interface ten-gigabitethernet 1/0/1
[PE3-Ten-GigabitEthernet1/0/1] service-instance 1000
[PE3-Ten-GigabitEthernet1/0/1-srv1000] encapsulation s-vid 100
[PE3-Ten-GigabitEthernet1/0/1-srv1000] xconnect vsi aaa
[PE3-Ten-GigabitEthernet1/0/1-srv1000] quit
[PE3-Ten-GigabitEthernet1/0/1] quit
Verifying the configuration
# Execute the display l2vpn pw verbose command on PE 1. The output shows two LDP PWs in up state
have been established.
[PE1] display l2vpn pw verbose
VSI Name: aaa
Peer: 3.3.3.9
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
Tunnel Group ID
Tunnel NHLFE IDs
Peer: 2.2.2.9
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
Tunnel Group ID
Tunnel NHLFE IDs
[PE2] display l2vpn pw verbose
VSI Name: aaa
Peer: 1.1.1.9
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
Tunnel Group ID
Tunnel NHLFE IDs
PW ID: 500
: LDP
: 8 PW State : Up
: 131090 Out Label: 131089
: 1500
: Main
: 0x1800000760000005
: 133
PW ID: 500
: LDP
: 9 PW State : Up
: 131091 Out Label: 131092
: 1500
: Main
: 0x1800000860000006
: 135
PW ID: 500
: LDP
: 8 PW State : Up
: 131089 Out Label: 131090
: 1500
: Main
: 0x1800000760000009
: 137
281