Sfp Transceivers - Siemens RUGGEDCOM RX1400 Installation Manual

Chapter 3
Communication Ports
For technical specifications, refer to
Each port features an LED that indicates its link state.
State
Green (Solid)
Green (Blinking)
Off
The following are the pin-out descriptions for the RJ45 connectors:
8
Figure 16: RJ45 Ethernet Port Pin Configuration
Section 3.2

SFP Transceivers

The RUGGEDCOM RX1400 features two Small Form-Factor Pluggable (SFP) transceiver sockets, which are
compatible with a wide array of SFP transceivers available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
Green (Solid)
Green (Blinking)
Off
Compatible SFP Transceivers
The following SFP transceivers are compatible with the RUGGEDCOM RX1400. For more information, including
installation/removal instructions and ordering information, refer to the
[https://support.industry.siemens.com/cs/ca/en/view/109482309].
26
Section 4.3, "Fast Ethernet Port
1
State
Specifications".
Description
Link established
Activity
No link detected
Pin 10/100Base-TX
1 RX+
2 RX-
3 TX+
4 Reserved (Do Not Connect)
5 Reserved (Do Not Connect)
6 TX-
7 Reserved (Do Not Connect)
8 Reserved (Do Not Connect)
Description
Link established
Activity
No link detected
RUGGEDCOM SFP Transceiver Catalog
RUGGEDCOM RX1400
Installation Guide
Description
Receive Data+
Receive Data-
Transmit Data+
Transmit Data-
SFP Transceivers