Table of Contents
Advertisement
Precautions
Ensure you read and understand this section before operating your
instrument. Pay attention to all warnings and recommendations to
prevent data loss, data inaccuracy, damage to the instrument, or injury
to you.
Do NOT attach sensors to any object with a high
potential voltage — I.e. a voltage that exceeds 50 V DC
or 32 V AC or the Safety Extra Low Voltage (SELV)
defined by your local power authority.
Ensure the cables and neck strap cannot become
entangled with any rotating or moving machinery.
Do NOT bring any objects that are sensitive to
magnetic fields near the magnetic mounting bases
(e.g. cardiac pacemakers, credit cards, floppy disks,
video tapes, audio cassette tapes, or mechanical
watches).
Explosion Hazard — When working in a hazardous
area with risk of flammable gases, all precautions and
limitations explained in the following Hazardous
Locations section must be followed.
Do NOT detach the battery pack from the instrument
for more than 10 minutes. This will erase the
instrument's date and time (it will retain all recordings
and other information).
Neck straps must be connected to the instrument
using the 2.5 turn stainless steel rings provided. The
strap must NOT be connected directly to the unit. This
will defeat the 10 kg safety release provided by the
rings. Replacement rings are available.
Section 1 — Introduction
4
Advertisement
Table of Contents
