Enter Rpm Using 1X Peak - GE SCOUT100-Ex Reference Manual

Enter RPM using 1X peak

To enter the RPM using the 1X peak:
1. Press or
2. Press > Press
3. Select Set RPM — The frequency of your selected peak will display.
4. Press to save this frequency as the RPM value.
NOTE: If a tachometer is connected to your instrument, it will use
the RPM from the tachometer rather than an entered value.
Section 7 — Analyzing Measurements Onsite
repeatedly to move the cursor to the 1X peak.
Extended Commands.
Setting the RPM
146