on the connected media player/computer to assign an IP address to the monitor, change monitor
settings, and set up HP Media Sign Player options, play lists, and On/Off schedule times.
1.
Connect the LAN cable (not included) using one of the following connections:
Computer Direct Connection—Connect the LAN cable to the LAN port on the display and to
the LAN port on the media player/computer (1).
Router—Connect the LAN cable to the LAN port on the display and to a LAN port on the
router (2).
Intranet—Connect the LAN cable to the LAN port on the display and to the Intranet network
via an access point (3).
Figure 3-23
2.
Install the HP Network Sign Manager on the media player/computer attached to the intranet. To
download the HP Network Sign Manager, see the website www.xxxxxxxxxx.com. See
HP Network Sign Manager on page 47
application.
ENWW
2nd Draft
Connecting the LAN cable
1
3
2
for details on using the HP Network Sign Manager
Connecting to external devices
Installing
23