Usb Export; Exporting To Usb; Saving Files And The Playback Schedules In The Usb Device - HP LD4201 User Manual

4. Select the file(s) to schedule the playback, and then click Add Schedule List. The files are now
added to Schedule List. Use Select All and Clear All to easily select and deselect the files.
5. Change the playback order of the files in Schedule List using Up and Down.
6. Set the playback schedule option.
7. Set the playback start and end times between 00:00 and 23:59.
NOTE:
8. Click Option to adjust the slide time interval and the aspect ratio. Select one of the options in the
Slide Time drop-down list. You can set the slide time to 5, 10, or 30 seconds, and 1, 5, 10, 30,
or 60 minutes. Use the Aspect drop-down list to adjust the aspect ratio of photos and movies.
Select Original to keep the original aspect ratio; select Full to view in full screen mode.
9. Click Apply to complete the playback schedule. The media files will be played on the display
according to the playback schedule.

USB Export

Use the USB Export function when the HP Network Sign Manager mediaPlayer/computer does not
have a network connection to the display. USB Export helps you to move media files and the
playback schedules of files to the USB device easily and conveniently. After you export media files
and the playback schedules of files to the USB device, the media files will be automatically played on
the monitor according to the playback schedule whenever you connect the USB device to the
monitor.

Exporting to USB

The following describes how USB Export works:
1. Create playlist and the playback schedules of media files.
2. Export media files and the playback schedules of files to the USB device.
3. Connect the USB device to the display. The media files will be automatically played on the
display according to the playback schedule.
NOTE:

Saving files and the playback schedules in the USB device

The following describes how to save media files to the USB device using the USB Export function:
1. Connect your USB device and start HP Network Sign Manager.
2. Click the USB tab. The USB function selection view appears in the control panel.
3. Click USB Export. The USB Export settings appear.
4. Click File Load. The Open dialog appears.
5. Select a file to save in the USB device, and then click Open. The file appears in the list.
72 Chapter 6 Installing HP Network Sign Manager
2nd Draft
You do not have to set the playback duration if Repeat Set is set to Always.
The media files will be automatically played only when the display is turned on.
ENWW