Toolbar; Search; Setting; Ethernet Network - HP LD4201 User Manual

Toolbar

The toolbar has a collection of useful functions.

Search

Search searches the display(s) connected to the network and adds them.
NOTE: Displays connected to serial communication will not be detected.

Setting

Setting allows you to set a communication method to connect to the signage display. You can select
either Ethernet (Network) or RS-232 serial communication depending on your environment.
NOTE:

Ethernet Network

To use Ethernet (network) communication:
1. Under Communication Select, select Network.
2. Click OK to complete.

RS-232C Serial Communication

To use RS-232-C serial communication:
1. Under Communication Select, select Serial. Adjust the serial communication settings to fit your
environment.
Item
Port
Baud Rate
Data
Parity
Stop
Flow Control
2. Click OK to complete.

Connect

Connect is used to reconnect the display to the network manually when the display is disconnected.
74 Chapter 6 Installing HP Network Sign Manager
2nd Draft
Description
Communication port (COM1 - COM9), Default: COM1
Communication speed (2400 - 115200), Default: 9600
Communication data (Data5 - Data8), Default: Data8
Parity check (even, odd, none), Default: none
The number of stop bits (0 - 1), Default: 1
Data flow (Xon/Xoff, hardware, none), Default: none
ENWW